본문내용 바로가기
무료배송 소득공제 정가제free

해외주문 [Book] Proceedings of the Twentieth International Cryogenic Engineering Conference (ICEC20) Beijing, China, 11-14 May 2004

Hardcover
Zhang, Liang , Lin, Liangzhen , Chen, Guobang 지음 | Elsevier Science | 2005년 11월 01일
  • 정가 : 570,720원
    판매가 : 507,940 [11%↓ 62,780원 할인] 할인쿠폰 받기
  • 혜택 :
    [기본적립] 5080원 적립 [1% 적립] [추가적립] 5만원 이상 구매 시 2,000원 추가적립 안내 [회원혜택] 회원 등급 별, 3만원 이상 구매 시 2~4% 추가적립 안내
  • 추가혜택 : 도서소득공제 안내 추가혜택 더보기
  • 배송비 : 무료 배송비 안내
  • [배송일정] Special Order 근무일 기준 4 ~ 6주 이내 출고 예정 배송일정 안내
    해외주문도서는 해외 거래처 사정에 의해 품절/지연될수 있습니다.
    스페셜오더 도서나 일서해외주문도서와 함께 주문시 배송일이 이에 맞추어 지연되오니, 이점 유의해주시기 바랍니다.

알립니다.

  • 해외주문도서는 고객님의 요청에 의해 주문하는 '개인 오더' 상품이기 때문에, 단순한 고객변심/착오로 인한 취소,반품, 교환의 경우 '해외주문 반품/취소 수수료'를 부담하셔야 합니다. 이점 유의하여 주시기 바랍니다. 반품/취소 수수료 : (1)서양도서-판매정가의 12%, (2)일본도서-판매정가의 7% (반품/취소 수수료는, 수입제반비용(FedEx수송비용, 관세사비, 보세창고료, 내륙 운송비, 통관비 등)과 재고리스크(미판매 리스크, 환차손)에 따른 비용을 포함하며, 서양도서는 판매정가의 12%, 일본도서는 판매정가의 7%가 적용됩니다.)
  • 외국도서의 경우 해외제공정보로만 서비스되어 미표기된 정보가 있을 수 있습니다. 필요한 정보가 있을경우 1:1 문의게시판 을 이용하여 주십시오.
상품상세정보
ISBN 9780080445595(0080445594)
쪽수 1067쪽
언어 English
크기 171(W) X 245(H) X 46(T) (mm)
제본형태 Hardcover
삽화유무 삽화있음
총권수 1권
리딩지수 Level Professional

책소개

이 책이 속한 분야

Proceedings of the 20th International Cryogenic Engineering Conference
이 책의 상품구성
* 해당 상품의 상세구성정보를 준비중입니다.

목차


Preface v
International Cryogenic Engineering Committee and Honorary Members vi
Local Organizing Committees vii
ICEC 20 Sponsor, ICEC 20 Co-Sponsors and ICEC 20 Exhibitors viii
Mendelssohn Award Lecture: Our life with Cryogenics 1(10)
I. Klipping
G. Klipping
LARGE SCALE REFRIGERATION
Cryogenics in Russia: Development of Basic Cryogenic Cycles (Plenary Invited Paper) 11(8)
V.M. Brodianski
A. Alexeev
Cryogenics in Russia (Plenary Invited Paper) 19(8)
A.Alexeev
G. Klipping
Conceptual Design of a 2kW Cryogenic System for the Neutrino Superconducting Beam Line Magnet System in the J-PARC 50GeV Proton Accelerator 27(4)
Y. Makida
Y. Doi
T. Haruyama
N. Kimura
T. Kobayashi
T. Nakamoto
T. Ogitsu
H. Ohhata
A. Yamamoto
The Neutral Beam Test Facility Cryopumping Operation: Preliminary Analysis and Design of the Cryogenic System 31(4)
B. Gravil
D. Henry
M. Dremel
JJ. Cordier
R. Hemsworth
D. Van Houtte
Performance of a Cryogenic System for the Superconducting RF Cavity at NSRRC 35(4)
F.Z. Hsiao
H.C. Li
W.S. Chiou
S.H. Chang
J.R. Chen
The Cryogenic System of BESIII in Preliminary Design 39(4)
L. Liu
Z. Zhu
S. Han
Y. Makida
H. Yamaoka
K. Tsuchiya
W. Liang
L. Gong
L. Zhang
Design Issues of the Distribution Valve Box of the KSTAR Helium Refrigerator 43(4)
H.-S. Chang
G.M. Gistau Baguer
K.W. Cho
Y.S. Kim
G.S. Lee
P. Briend
P. Fuenzalida
A. Fossen
A Retrospect on the Successful Commissioning of the Linde 18kW Refrigerators for the LHC Particle Accelerator at CERN 47(4)
A. Kuendig
B. Chromec
U. Fleck
Th. Voigt
Helium Refrigeration System for Wendelstein 7-X 51(4)
A. Kuendig
F. Schauer
Y. Bozhko
C.P. Dhard
CRYOGENIC SYSTEMS AND TEST FACILITIES
Cryogen Free Refrigeration to 270mK by Adiabatic Expansion of He3 Gas (Plenary Invited Paper) 55(8)
V. Mikheev
P. Noonan
A. Adams
Development of the Cryogenic Ground Support Equipment (CGSE) for the Superconducting Magnet of the Alpha Magnetic Spectrometer (AMS-02) 63(4)
A.Gu
A. Grechko
S. Harrison
H. Hofer
W. Lin
Y. Shi
S.C.C. Ting
S. Vostrikov
R. Wang
Unique Method for Liquid Nitrogen Precooling of a Plate Fin Heat Exchanger in a Helium Refrigeration Cycle 67(4)
T.B. Weber
A. Candia
G. Howell
M. Racine
J.G. Weisend II
Test Results and Analysis of Cryogenic System for Cooling HTS Cables and the Next Stage Plan 71(4)
Y.F. Fan
L.H. Gong
X.D. Xu
L.F. Li
L. Zhang
L.Y. Xiao
Cryogenic Facility Design in BEPCII Superconducting Upgrade 75(4)
L.X. Jia
L. Wang
G.D. Yang
X.K. Liu
X.B. Zhang
H.M. Tang
H.P. Du
Z.H. Xing
C.S. Liu
G. Han
F.Y. Xu
T.H. Wang
C.Z. Yang
H. Xiao
D. Liu
L.H. Shi
M.X. Huang
X.Y. Gai
F.Y. Xu
Z.M. Ji
W. Jiang
Z.L. Yao
A.B. Chen
First Cold Test of the ISAC-II Medium Beta Cryomodule 79(4)
I. Sekachev
R.E. Laxdal
C. Marshall
T. Ries
G. Stanford
Experimental Study of Self-pressurizing Transfer System for Cryogenic Liquid 83(4)
Q.F. Li
G.B. Chen
X.M. Xie
R. Bao
Design of a Cooling System for the Cold Test of the ITER TF Coils before Installation 87(4)
G.R. Zahn
J.L. Duchateau
W.H. Fietz
B. Gravil
R. Heller
F. Millet
S. Nicollet
P. Chesny
Study on Key-tech Problems in Development of a Cold Neutron Source in China Advanced Research Reactor 91(4)
F. Quanke
Y. Qingfeng
Z. Cun
S. Feng
Y. Luzheng
Experiences from the Operation Tests with the ITER Model Pump 95(4)
H. Haas
A. Antipenkov
Chr. Day
M. Dremel
A. Mack
D.K. Murdoch
Design of Cryogenic System for the KSTAR Device 99(4)
Y.S. Kim
H.S. Chang
K.W. Cho
G.M. Gistau Baguer
J.S. Bak
G.S. Lee
P. Briend
P. Fuenzalida
A. Fossen
Air Liquid Cryogenic System for the KSTAR Device 103(4)
P. Briend
P. Dauget
F. Delcayre
I. Abe
E. Fauve
A. Fossen
P. Fuenzalida
L.A. Lee
G. Gistau
Y.S. Kim
K.W. Cho
H.S. Chang
Cryogenic System for BEPCII Cavity IR Quadrupole and Detector Solenoid Magnets 107(4)
L.X. Jia
L. Wang
Status of the ISAC-II Cryogenic System 111(4)
I. Sekachev
W. Andersson
R.E. Laxdal
C. Marshal
G. Stanford
Overview of Different Standard Helium Liquefiers/Refrigerators for Various Applications 115(4)
A. Caillaud
M. Bonneton
F. Delcayre
V. Grabie
D. Grillot
B. Hilbert
A. Praud
E. Walter
Standard Liquefier-Test Results with Improved Turbines 119(4)
H. Schoenfeld
D. Cretegny
K. Loehlein
Thermal Fluid Modeling of BEPCII IR Quadrupole Magnet Cryostat 123(4)
L. Wang
H.M. Tang
X.B. Zhang
G.D. Yang
L.X. Jia
COOLERS
Recent Developments on Cryocoolers in Europe (Invited Paper) 127(10)
A. Ravex
T. Trollier
Experimental Study on a Split Free-Piston Stirling Cooler for Space Applications 137(4)
W. Zhang
Y. Wu
G.H. Lu
The Effects of the Clearance in the Cold Finger on the Performance of the Stirling Refrigerator 141(4)
Y-J. Hong
D-Y. Koh
S-J. Park
H-B. Kim
Y-D. Choi
Development of a Stirling Cryocooler with Linear Guidway Supports 145(4)
G. Hong
Q. Li
Y.M. Xi
Z.S. Nie
Novel Regenerator Design and its Experimental Characteristics 149(4)
K. Nam
S. Jeong
Investigation of a Single-Stage G-M Refrigerator with High Cooling Capacity for HTS Devices 153(4)
Z-C. Fang
X-T. Su
L-Q. Liu
L-H. Gong
L. Zhang
Preliminary Study on GM Refrigerator with Heat Exchanger 157(4)
W.Q. Liang
L.H. Gong
L. Zhang
Dimensional Analysis on Multi-Component Mixed-Refrigerants Flow Characteristics in Adiabatic Capillary Tube 161(4)
Y.F. Qi
M.Q. Gong
Z.H. Sun
E.C. Luo
J.F. Wu
An Experimental Research on a Small Flow Vortex Tube at Low Temperature Ranges 165(4)
J.Y. Liu
M.Q. Gong
J.F. Wu
Y. Cao
E.C. Luo
Performance of Different Throttle Refrigeration Cycles 169(4)
M.Q. Gong
J.F. Wu
A 70 K J-T Cryocooler Based on the Fractional Mixed-Refrigerant Cycle 173(4)
M.Q. Gong
J.F. Wu
Development of a Cryogenic Water-Trap Based on the Recuperative Mixture Refrigeration Cycle 177(4)
M.Q. Gong
J.F. Wu
Q.G. Hu
Room Temperature Magnetic Refrigerator using Both Metal Gd or/and Gd-Si-Ge Alloys and a Permanent Magnetic Field Source 181(4)
D.W. Lu
H.B. Wu
G.Q. Yuan
Y.S. Han
X.N. Xu
X. Jin
Properties of Thermoelectric Device with (BixSbi-x)2(TeySe1-y)3 Materials 185(4)
H-J. Liu
G. Li
L-F. Li
PULSE TUBE COOLERS
Future Trend of Pulse Tube Cryocooler Research (Plenary Invited Paper) 189(8)
Y. Matsubara
Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage 197(4)
N. Jiang
U. Lindemann
G.B. Chen
G. Thummes
Experimental Analysis of the Oscillating Flow Characteristics for High Frequency Regenerators 201(4)
X-L. Wang
M-G. Zhao
J-H. Cai
J-T. Liang
Y. Zhou
Regenerative Recuperator for Tandem 4 K Pulse Tube Refrigerator 205(4)
J. Jung
S. Jeong
Y. Choi
K. Nam
Experimental Investigation on DC Flow Suppression and Refrigeration Characteristics of a High-Performance Single-Stage GM-Type PTC 209(4)
Y. Jiang
G. Chen
G. Thummes
Use of Ceramic Part in G-M Refrigerator 213(4)
X-T. Su
Z-C
Fang
L-H. Gong
L-F. Li
L. Zhang
A Study on the In-Line Type Inertance Tube Pulse Tube Cryocooler 217(4)
S-J. Park
D-Y. Koh
Y-J. Hong
H-B. Kim
S-Y. Kim
W-S. Jung
Experiment on a Single-Stage GM Type Pulse Tube Cryocooler near 20K 221(4)
Z.H. Can
H.Z. Liu
Z.Z. Cheng
L.M. Qiu
G.B. Chen
Design and Test of a 80 K Miniature Pulse Tube Cryocooler 225(4)
M-G. Zhao
X-L. Wang
X-F. Hou
J-T. Liang
J-H. Cai
Y. Zhou
Development of the 3.5 W at 80 K High-Frequency Pulse Tube Cryocooler 229(4)
W. Jing
G.P. Wang
J.T. Liang
J.H. Cai
The Effect of Timing Ratio of Injecting to Rejecting on G-M Type PTCs Cooling Temperature 233(4)
Y-Y. Wang
J-H. Cai
J-T. Liang
Comparison of Oscillating Flow Characteristics of a Metallic and a Nonmetallic Regenerator at High Frequencies 237(4)
X-L. Wang
H-Z. Dang
J-H. Cai
J-T. Liang
Y. Zhou
Analysis of Inertance Tube in the Pulse Tube Refrigerator 241(4)
N. Chen
C.G. Yang
L Xu
R.P. Xu
Single Stage Double-Inlet Pulse Tube Refrigerator with Integral Thermo-Electric Cooler 245(4)
R. Karunanithi
S. Jacob
S. Kasthurirengan
N. Durgesh
B. Upendra
K. Tamizhanban
Experimental Study of Wall Temperature Distribution of Stirling Type Pulse Tube Refrigerator (SPTR) 249(4)
Y.W. Liu
Y.L. He
J. Huang
X.Z. Li
C.Z. Chen
Studies on a Single Stage GM Type Pulse Tube Cryocooler using an Indigenous Helium Compressor 253(4)
S. Kasthurirengan
S. Jacob
R. Karunanithi
B. Upendra
D.S. Nadig
B. Anand
Experimental Investigation on the Performances of Gas Flow in Oscillating Tube 257(4)
Z.C.Li
L.Xu
Optimal Vector Analysis of the Phase Shifter in the Pulse Tube Refrigerator 261(4)
N. Chen
C.G. Yang
L. Xu
Characteristics of 4 K Pulse Tube Cryocoolers in Applications 265(4)
C. Wang
Experimental Investigation on Heat Transfer Performance of a Cryogenic Thermosyphon 269(4)
W.Z. Li
L.M. Qiu
X.J. Zhang
P. Chen
Y.L He
Reduction of Convective Heat Losses in Pulse Tube Refrigerators by Additional DC Flow 273(4)
M. Shiraishi
Y. Fujisawa
M. Murakami
A. Nakano
Interference Characterization of Stirling-Type Nonmagnetic and Nonmetallic Pulse Tube Cryocoolers for High-Tc SQUIDs Operation 277(4)
H.Z. Dang
J.T. Liang
Y.L. Ju
Y. Zhou
Performance of Vibration-Free Pulse Tube Cryocooler System for a Gravitational Wave Detector 281(4)
T. Haruyama
T. Tomaru
T. Suzuki
T. Shintomi
N. Sato
A. Yamamoto
Y. Ikushima
R. Li
T. Akutsu
T. Uchiyama
S. Miyoki
Influence of He-H2 Mixture Proportion on the Performance of Pulse Tube Refrigerator 285(4)
Y.H. Huang
G.B. Chen
Z.H. Gan
K. Tang
R. Bao
Three Dimensional Numerical Computation of the Flow Field in a Pulse Tube 289(4)
W.J. Ding
Y.L. He
W.Q. Tao
Comparison of the Performance of Regenerators to Counterflow Heat Exchangers 293(4)
M.E. Will
A.T.A.M. de Waele
Temperature Hysteresis in a GM-Type Orifice Pulse Tube Refrigerator 297(4)
Z.H. Gan
G. Thummes
THERMO-ACOUSTIC REFRIGERATION SYSTEM
Theoretical Prediction on the Coupling of Thermoacoustic Prime Mover and RC Load 301(4)
K. Tang
G.B. Chen
Z.Z. Jia
N. Jiang
R. Bao
Lattice Gas Modeling of Thermoacoustic Oscillations 305(4)
X.Q. Zhang
Y. Chen
X. Liu
Characteristics of a Miniature Pulse Tube Cooler Driven by Thermoacoustic Standing Wave Engine 309(4)
W. Dai
E.C. Luo
Y. Zhou
W.X. Zhu
Experimental Investigation on the Dynamic Character of Thermoacoustic Engine and Parameters of Regenerator 313(4)
X. Chen
Q. Li
Z.Y. Li
Z.B. Yu
X.J. Xie
Basic Operation Principle of a Novel Cascade Thermoacoustic Prime Mover 317(4)
E. Luo
E. Dai
H. Ling
Study on a Linear Compressor with Metal-Bellow Replacing Conventional Cylinder-Piston Unit 321(4)
Z. Wu
E. Luo
W. Dai
J. Hu
Analytical Model for Onset Temperature Difference of Thermoacoustic Stirling Prime Movers 325(4)
J. Hu
E. Luo
H. Ling
Two-Dimensional Numerical Simulation of the Inertance Tube 329(4)
Y. Zhang
W. Dai
E. Luo
R. Radebaugh
M. Lewis
Numerical Simulation on a Novel Cascade Thermoacoustic Prime Mover 333(4)
H. Ling
E. Luo
W. Dai
X. Li
New Perspective on Thermodynamic Cycles of Oscillating Flow Regenerators 337(4)
E. Luo
W. Dai
R. Radebaugh
Experimental Investigation on a Room-Temperature Traveling-Wave Thermoacoustic Refrigerator 341(4)
Y. Huang
E. Luo
W. Dai
Z. Wu
Study on Thermoacoustic Resonance Pipe Driven by Loudspeaker using Two-Microphone Method 345(4)
L. Fan
B.R. Wang
T. Jin
Y. Shen
S.Y. Zhang
Stack and Frequency's Coupling Characteristic Analysis in Thermoacoustic Systems 349(4)
F.Z. Zhang
R.Q. Jiang
Q. Li
X. Chen
Numerical Simulation of Loudspeaker-Driven Thermoacoustic Refrigerator 353(4)
Q. Tu
Z.J. Chen
J.X. Liu
X.Q. Zhang
Q. Li
F.Z. Guo
Study on the Optimal Characteristic Dimension of Regenerator in a Thermoacoustic Engine 357(4)
Z.B. Yu
Q. Li
X. Chen
F.Z. Guo
X.J. Xie
Investigation on Acoustic Characteristics of Regenerator in the Thermoacoustic Apparatus 361(4)
X.J. Xie
Q. Li
X. Chen
Z.B. Yu
Discussion on Resonant Frequency in Thermoacoustic Systems 365(4)
T. Jin
L. Fan
B.S. Zhang
B.R. Wang
G.B. Chen
Figure of Merit for Regenerator Working in Acoustic Field 369(6)
F.Z. Guo
Investigation of Acoustic Streaming in a Thermoacoustic-Stirling Heat Engine 375(4)
P. Duthil
E. Bretagne
J. Wu
M.-X. Francois
Q. Li
Investigation on a Thermoacoustically Driven Pulse Tube Cooler Working at 82.5 K 379(4)
L. Qiu
D. Sun
W. Yan
P. Chen
Z. Gan
G. Chen
Thermoacoustic Turbulent-Flow Model for Inertance Tubes used for Pulse Tube Refrigerators 383(4)
E. Luo
R. Radebaugh
W. Dai
M. Lewis
Z. Wu
Y. Zhang
Thermoacoustically Driven Pulse Tube Refrigeration below 90 K 387(4)
K. Tang
G.B. Chen
T. Jin
R. Bao
SPACE CRYOGENICS
New Generation of Cooled Infrared Space Telescopes (Plenary Invited Paper) 391(10)
D. Lemke
Study on Electricity Generation Performance of Thermoelectric Device in Extreme Environmental Conditions 401(4)
Z.-L. Wu
Y-X. Zhou
T. Li
J. Liu
Experimental Investigation on He II Porous Plug Liquid-Vapor Phase Separator 405(4)
X. Yu
Q. Li
Z. Li
Qiang Li
Novel Cryogenic Motion Control for Aerospace 409(4)
Z.T. Cao
H.P. Chen
G.G. He
J.J. Cai
Spitzer Space Telescope Thermal/Cryogenic System Flight Performance 413(6)
P.T. Finley
R.A. Hopkins
R.B. Schweickart
Thermal Validation of the Design of the CFRP Support Members to be used in the Spatial Framework of the Herschel Space Observatory 419(4)
P.C. McDonald
E. Jaramillo
Development and Testing of a Novel Thermal Switch 423(4)
J.G. You
D.P. Dong
W.Y. Wang
Z.W. Li
Cryocoolers Development and Integration for Space Applications at Air Liquide 427(10)
A.Ravex
T. Trollier
L. Sentis
F. Durand
P. Crespi
Overview of the Air Liquide Cryogenic Ground Space Activities for Launchers and Satellites 437(4)
S. Duval
P. Bravais
JC. Courty
S. Crispel
G. Marot
Thermal Analysis of Cryogenic Rocket Engine with One, Two and Three Dimensional Approaches 441(4)
B.T. Kuzhiveli
S.C. Ghosh
G.K. Kuruvila
V.G. Gandhi
Liquid Hydrogen Droplet Generation from a Vibrating Orifice 445(4)
J. Xu
D. Celik
M. Y. Hussaini
S.W. Van Sciver
The Working Performance of Radiant Cooler in Thermal Vacuum Test 449(4)
H.Y. Xu
D.P. Dong
W.Y. Wang
Z. Li
A Study on the Conic Support in the Radiant Cooler 453(4)
L. Y.Fu
F.H. Tu
W.Y. Wang
Analysis of the Influences of View Angle on Paraboloid W Style Radiant Cooler's Working Performance 457(4)
X.J. Wang
Y.P. Pan
Y.L. He
C.Z. Chen
CRYOGENIC COMPONENTS AND MACHINERY
Design and Manufacturing of Cryosorption Pumps for Testbeds of ITER Relevant Neutral Beam Injectors 461(4)
M. Dremel
C. Day
A. Mack
H. Hass
V. Hauer
E. Speth
H.D. Falter
R. Riedl
B. Gravil
Simple Method for Calculation of Cryogenic Transfer Line Cool Down 465(4)
A.Alexeev
Th. Pelle
Study of New Aerodynamic Foil Thrust Gas Bearing with Elastic Support for Cryogenic Turbo-Expander 469(4)
C.Z. Chen
S.N. Lin
Y. Hou
Z.H. Zhu
Design of Small Turbo Braton Cycle Air Refrigerator Test Rig 473(4)
Y. Hou
Y. Sun
J. Wang
C.Z. Chen
Analysis of Centrifugal Stresses in the Rotor of a Cryogenic Turboexpander 477(6)
P. Ghosh
S.K. Sarangi
Study of Temperature Distribution of Flat Steel Ribbon Wound Cryogenic High-pressure Vessel 483(4)
X.L. Cui
G.M. Chen
The Design and Study of a Reciprocating Helium Compressor 487(4)
G. Lei
L-H. Gong
W-H. Lu
L. Zhang
SUPERCONDUCTOR BEHAVIOUR
Strain Effects on the Critical Current of Bi-2223/Ag Tape 491(4)
Y.L. Wu
Z.D. Wang
Y.F. Xiong
Thermal, Electrical Properties and Microstructure of High Purity Niobium for High Gradient Superconducting Cavities 495(4)
H.M. Wen
X. Singer
W. Singer
D. Proch
E. Vogel
D. Hui
AC Loss Characteristics of Bi-2212 Multifilamentary Round Wires and their Cables 499(4)
K. Funaki
M. Iwakuma
K. Kajikawa
N. Hirano
S. Nagaya
N. Ohtani
T. Hasegawa
Property of Joint Resistance of Bi2223 Multi-filamentary Tape by Using Sn-Pb Solder 503(4)
C. Gu
C. Zhuang
J.Y. Zhang
T.M. Qu
Z. Han
Quench Characteristics of High-Tc Superconducting Tape for Alternating Over-Current using DFT 507(4)
S-H. Lim
S-W. Yim
J-H. Lee
S.C. Ko
S-D. Hwang
B-S. Han
Dip-coated Yba2Cu3O7-x Films on Ag Substrate by MOD Method 511(6)
J. Dong
M. Liu
D.M. Liu
Y. Zhao
J.X. Liang
J.L. Sheng
H.L. Suo
M.L. Zhou
Influence of Ag Substrate Surface Condition on Surface Morphology of YBCO Film 517(4)
M. Liu
D.M. Liu
J. Dong
Y. Zhao
J. Sheng
J.X. Liang
H.L. Suo
M.L. Zhou
Boiling Heat Transfer to Liquid Nitrogen Pool from Ag Sheathed PbBi2223 Tapes Carrying Over-Current 521(4)
W. Bailey
E.A. Young
Y. Yang
C. Beduz
Equivalent Circuit Model for High-Tc Superconducting Flux Flow Transistor with a Dual-Gate Structure 525(4)
S. Ko
H-G. Kang
S-H. Lim
J-H. Lee
B-S. Han
Direct Observation of Percolation and Phase Separation in Pr5/8Ca3/8MnO3 System 529(4)
G.X. Cao
J.C. Zhang
P.L. Li
J. Yu
S.P. Wang
C. Jing
S.X. Cao
X.C. Shen
The Reentrant Behaviour of Spin-Glass Phase in (La, Pr)0.5Ca0.5MnO3 Manganites 533(4)
J.C. Zhang
G.X. Cao
Y.N. Sha
S.P. Wang
J. Yu
G.Q. Jia
C. Jing
S.X. Cao
X.C. Shen
Anisotropic Transport and Magnetic Properties of Pr1/2Sr1/2MnO3 Single Crystal Sample 537(4)
S.X. Cao
X.Y. Wang
Y.F. Zhang
L.M. Yu
C. Jing
J.C. Zhang
X.C. Shen
Dependence of Structure and Magnetic Properties on Magnetic Field and Temperature for Bi-Mn Alloy 541(4)
Y.S. Liu
J.C. Zhang
G.Q. Jia
X.Y. Zhang
Z.M. Ren
C. Jing
X. Li
S.X. Cao
K. Deng
Physical Properties in Layered Transition-Metal Oxide Crystals and Anisotropic Transport Measurement 545(4)
K.Q. Ruan
Y. Yu
S.L. Huang
H.L. Li
S. Qian
L.Z. Cao
Design of a Cryogenic Giant Magnetostrictive Actuator using HTS 549(4)
J.J. Cai
Z.T. Cao
H.P. Chen
G.G. He
A New Method of Zooming in the Cool Power of the Room Temperature Magnetic Refrigeration 553(4)
D.W. Lu
H.B. Wu
G.Q. Yuan
Y.S. Han
X.N. Xu
X. Jin
Extended Power Law of Nonlinear Transport Properties of Superconducting Materials 557(4)
Z.H. Ning
X. Hu
D.L. Yin
Z. Qi
F.R. Wang
J.D. Guo
C.Y. Li
AC Loss Characteristics of HTS Tapes Subject to Bending Strains 561(4)
O. Tsukamoto
J. Ogawa
H. Suzuki
LTS SUPERCONDUCTING DEVICES
EAST Superconducting Tokamak Device (Plenary Invited Paper) 565(6)
P.O. Weng
Challenges of Large Scale Superconducting Accelerators (Plenary Invited Paper - Abstract) 571(2)
D. Proch
Cryogen-free Superconducting Magnet Fabricated by a React-and-Wind Method Employing Nb3Sn Wires with CuNbTi Reinforcement 573(4)
K. Watanabe
G. Nishijima
S. Awaji
K. Takahashi
K. Miyoshi
S. Megro
M. Ishizuka
T. Haseb
Design and Manufacture of a NbTi Insert Module Relevant for the ITER PF Magnets Conductor 577(4)
A.della Corte
L. Affinito
S. Chiarelli
P. Gislon
G. Messina
L. Muzzi
G. Pasotti
S. Turtu
M. Mariani
A. Matrone
S. Rossi
Multi-Tube Power Leads Tower for BEPCII IR Magnets 581(4)
L.X. Jia
X.B. Zhang
L. Wang T.H. Wang
Z.L. Yao
The MICE Focusing Solenoids and their Cooling System 585(4)
M.A. Green
G. Barr
W. Lau
R.S. Senanayake
S.Q. Yang
Evaluation of the ITER Cable in Conduit Conductor Heat Transfer 589(4)
S. Nicollet
D. Ciazynski
J.L. Duchateau
B. Lacroix
B. Renard
The BESIII Detector Magnet 593(4)
Z. Zhu
L. Zhao
L. Wang
Z. Hou
S. Huang
H. Yang
J. Hu
J. Zhou
S. Han
C. Yi
H. Chen
Q. Xu
L. Liu
Y. Makida
H. Yamaoka
K. Tsuchiya
B. Wang
B. Wahrer
C. Taylor
C. Chen
Stability Analysis for Cryocooled Aluminum-Stabilized Superconducting Magnet 597(4)
H. Liu
Q. Wang
Y. Yu
Y. Bai
Thermal Design of BESIII Magnet 601(4)
Q. Xu
Z. Zhu
L. Liu
S. Wang
C. Yi
H. Chen
L. Zhang
A Numerical Code to Simulate Quenching in Conduction Cooled Superconducting Magnet 605(4)
Y. Dai
B. Blau
H. Hofer
Y. Yu
Q. Wang
Numerical Simulation on Thermal Stress and Magnetic Forces of Current Leads in BEPCII 609(4)
X.B. Zhang
L.X. Jia
Design and Manufacture of a Low-Current ADR Magnet for a Space Application 613(4)
C. Brockley-Blatt
S. Harrison
I. Hepburn
R. McMahon
S. Milward
R. Stafford Allen
Study of Stress, Strain in Super-Conducting Magnet by Fiber-Bragg Grating 617(4)
Z.A. Feng
Q.L. Wang
F. Dai
G.J. Huang
HTS SUPERCONDUCTING DEVICES
Design Study of Conduction-cooled High Temperature Superconducting Magnet 621(4)
Q.L. Wang
H. Huang
S.S. Song
Y.M. Dai
B.Z. Zhao
Y.J. Yun
L.G. Yan
Testing the Coils of the Superconducting Magnet for the Alpha Magnetic Spectrometer 625(4)
R. McMahon
S. Harrison
S. Milward
R. Stafford Allen
H. Hofer
J. Ulbricht
G. Viertel
S.C.C. Ting
Characterization of the Quenching Process and the Protection of an ac High Temperature Superconductor Coil 629(4)
X.H. Li
Y.S. Wang
L.Y. Xiao
Technical Analyses of HTS Bulk used in a Rotating Machine 633(4)
M. Qiu
H.K. Huo
Z. Xu
Z.H. Yao
D. Xia
L.Z Lin
Investigation of the Subcooled LN2 Characteristics in the Prototype Cryostat for the Resistive Superconducting Fault Current Limiter 637(4)
S. Cho
H.S. Yang
D.L. Kim
W.M. Jung
D.H. Kim
H.R. Kim
O.B. Hyun
LN2 Forced Flow Cooling on HTS Power Cables 641(4)
D.-Y. Koh
H.-K. Yeom
K.-S. Lee
Shape Optimization of Field Windings in a High Temperature Superconducting Synchronous Generator with Finite Element Method 645(4)
F.C. Song
G.Q. Zhang
B. Chen
S.Z. Yu
G.B. Gu
Development and Testing of 10.5kV/1.5kA HTS Power Cable 649(4)
Y.B. Lin
Z.Y. Gao
Z. Ning
S.T. Dai
Y.P. Teng
L. Xu
L.Z. Lin
L.Y. Xiao
Normal Transition in YBCO Thin Film and its Effect on Current Limiting Characteristics 653(4)
T. Onishi
K. Sasaki
T. Kayoda
Study on a Hybrid Superconducting Magnetic Bearing System 657(4)
J.R. Fang
L.Z. Lin
L.G. Yan
Electromagnetic Design and Analysis of a PM Motor with HTS Bulk 661(4)
H.K. Huo M. Qiu
D. Xia
Z. Xu
L.Z. Lin
Finite-Element Simulation of HTS Bulk Reluctance Motor 665(4)
Z. Xu
M. Qiu
Z.H. Yao
D. Xia
A Current Compensation Type Superconducting Fault Current Limiter 669(4)
D.F. Chen
C.H. Zhao
L.Y. Xiao
Evaluation on Power System Transient Stability with Resistor Type SFCL and Parameter Design 673(4)
Y. Ye
L.Y. Xiao
Effects of Bias Power Supply on Bridge Type Superconducting FCL 677(4)
Z. F.Zhang
L.Y. Xiao
20kA HTS Current Leads for EAST Tokamak Project 681(4)
Y.F. Bi
X.Q. Chen
D.K. Ma
X.L. Liu
S.T. Wu
J.G. Li
Design of Cooling System and Temperature Characteristics Analysis of High Temperature Superconducting Demonstrative Synchronous Generator 685(4)
B. Chen
G.Q. Zhang
F.C. Song
S.Z. Yu
G.B. Gu
A Prototype 4m, 2kA, AC HTS Power Cable System 689(4)
H.X. Xi
B. Hou
Y.F. Bi
X.C. Yang
H.K Ding
Y. Xin
Development of a Three-Phase HTS Power Transformer 693(4)
Y.S. Wang
X. Zhao
H. Li
J. Han
L.Y. Xiao
L.Z. Lin
Y. Guan
Q. Bao
G. Lu
Z. Zhu
X. Xu
Y. Lu
S. Dai
D. Hui
Thermal Stability and Quench Propagation in a Cryocooler-Cooled Pancake Coil of BI-2223 Tape Operating Between 35K and 65K 697(4)
A.P. Johnstone
Y. Yang
C. Beduz
A New Concept of Bridge Fault Current Limiter-SMES for Interline Application to Improve Power Quality 701(4)
C.H. Zhao
L.Y. Xiao
L.Z. Lin
Y.J. Yu
Design and Primary Experiment for a Single Phase 220V/100A/6kW Bridge Fault Current Limiter-SMES 705(4)
C.H. Zhao
Y. Zhang
S. Li
X.H. Huang
D.F. Chen
L.Y. Xiao
L.Z. Lin
Y.J. Yu
Fabrication and Characterization of Bi-2223 Coils for Generator Applications 709(4)
B. Xu
M.K. Al-Mosawi
Y. Yang
C. Beduz
Shape Optimization of HTS Magnets using Hybrid Genetic Algorithms 713(4)
C. Wang
Q.L. Wang
An Adaptive Neuro-Fuzzy Control Strategy for the Bridge Type Superconducting Fault Current Controller 717(4)
W.Y. Guo
C.H. Zhao
L.Y. Xiao
APPLICATIONS
Cryoelectronics - An Experimental Examination of the Behaviour of Power Electronic Devices at Low Temperatures 721(4)
C.J. Hawley
S.A. Gower
Operational Amplifiers in the Temperature Range from 300 to 4 K 725(4)
W. Nawrocki
J. Pajakowski
Development and Test of a Cryopulverizer for Reprocessing Plastic Wastes 729(4)
S. Jacob
S. Kasthurirengan
R. Karunanithi
Upendra Behera
D.S. Nadig
A Cryostat with Optics Windows for Study of ICF Cryogenics Target 733(4)
Y. Liu
Y.Q. Zhu
G. Zhou
C. Jiang
Temperature Effects on Formation of a Uniform Layer of Isotopes Inside a Cryogenic ICF Target 737(4)
G. Zhou
Y.Q. Zhu
Y. Liu
C. Jiang
Q. Li
GAS LIQUEFACTION AND SEPARATION
Optimization Analysis of Peakshaving Cycle to Liquefy the Natural Gas 741(4)
Y. Shi
A. Gu
R. Wang
G. Zhu
The Experimental Study on the Performance of a Small-Scale Oxygen Concentrator by PSA 745(4)
Y.W. Zhang
Y.Y. Wu
J.Y. Gong
J.L. Zhang
The Thermodynamic Analysis and Adjusting Methods for Reliquefaction Plant on Board LEG Carriers 749(4)
Z.L. Zhao
A.Z. Jiang
L.L. Xiong
A Study of the Optimum Temperature for Hydrogen Storage on Carbon Nanostructures 753(4)
Q.R. Zheng
A.Z. Gu
X.S. Lu
W.S. Lin
Design of Vortex Tubes and Experimental Program on LOX Separation using Cryogenic Vortex Tubes 757(4)
S. Jacob
Upendra Behera
P.J. Paul
S. Kasthurirengan
R. Karunanithi
S.N. Ram
K. Dinesh
HEAT TRANSFER AND THERMAL INSULATION
Heat Transfer Enhancement of He II Co-Current Two-Phase Flow in the Presence of Atomisation 761(4)
B. Rousset
P. Thibault
S. Perraud
L. Puech
P.E. Wolf
R. van Weelderen
Design Consideration Validation of Cryo-Components for Current Feeder System of SST-1 using Flexibility Analysis 765(4)
N.C. Gupta
B. Sarkar
G. Gupta
Y.C. Saxena
Contractible Thermosyphon for Conduction Cooled Superconducting Magnets 769(4)
C. Noh
S. Kim
S. Jeong
H. Jin
Experimental Characterization of the Hydraulic Behavior of Cooling for Toroidal Field Magnet of SST-1 773(4)
B. Sarkar
N.C. Gupta
A.K. Sahu
G. Bansal
S. Pradhan
C.P. Dhard
Misra Ruchi
Panchal Pradip
Tank Jignesh
G. Gupta
Y.C. Saxena
Performance Analysis of Counter Flow Plate-Fin Heat Exchangers Considering the Effect of Longitudinal Conduction 777(4)
T.C. Mi
Y.Z. Li
J. Wang
Y.H. Zhu
Investigation of Header Configuration and its Effect on Flow Maldistribution in Plate-Fin Heat Exchanger 781(4)
J. Wen
Y.Z. Li
K. Zhang
Experimental Investigation on High Performance Cryogenic Heat Transfer Based upon Natural Circulation Cooling 785(4)
L.M. Qiu
W.Z. Li
Z.H. Gan
X.J. Zhang
B. Jiao
G.B. Chen
C.J. Yang
Film Boiling Modes in Weakly Subcooled He II around Lambda Pressure 789(4)
M. Nozawa
N. Kimura
M. Murakami
P. Zhang
Modeling of Multilayer Vacuum Insulation - Complexity Versus Accuracy 793(4)
M. Chorowski
J. Polinski
Experimental Study of the Narrow Channel Heat Transfer in Liquid Nitrogen 797(4)
P. Zhang
G.C. You
X. Ren
R.Z. Wang
Observation of Various Boiling States in Nearly Saturated He II 801(4)
P. Zhang
M. Murakami
M. Nozawa
Heat Transfer During Natural Convective Boiling in a Vertical Uniformly Heated Closed Tube Submerged in Saturated Helium 805(4)
B. Baudouy
Several Problems in the Thermal Contact Resistance Research of Solid Interfaces at Low Temperature 809(4)
L. Xu
Z.C. Li
CFD Approach to Thermal Pulse Propagation and Heat Transfer in Forced Flow Field of He II 813(4)
M. Yanase
M. Murakami
Investigation of Thermal Insulation for HTS Cable Systems 817(4)
D.H. Kim
D.L. Kim
H.S. Yang
W.M. Jung
S.D. Hwang
Experimental Investigation on Pool Boiling Heat Transfer of Pure Refrigerants and Binary Mixtures 821(4)
Z.H. Sun
M.Q. Gong
Y.F. Qi
E.C. Luo
J.F. Wu
Modeling the Thermal Mechanical Behavior of a 300 K Vacuum Vessel that is Cooled by Liquid Hydrogen in Film Boiling 825(4)
S.Q. Yang
M.A. Green
W. Lau
Fractal Description of Thermal Contact Resistance between Rough Surfaces at Low Temperature 829(4)
R.P. Xu
H.D. Feng
T.X. Jin
L. Xu
L.P. Zhao
Study of Two Phase Flow Distribution and its Influence in a Plate-Fin Heat Exchanger 833(4)
Q. Xu
Y.Z. Li
Z. Zhang
A Thermodynamic Optimization of Counterflow Recuperative-Type Heat Exchangers 837(4)
Q. Wang
H.F. Zhang
G.M. Chen
A New Type of Condenser-Evaporator Safely Operated in Large Air Separation Plant 841(4)
Y.Y. Wu
L.F. Chen
T.H. Wu
Heat Transfer in Gas Filled Pipes with Closed Warm End under Different Orientations 845(4)
M. Hieke
Ch. Haberstroh
H. Quack
Normalized Representation for Steady State Heat Transport in a Channel Containing He II Covering Pressure Range up to 1.5 Mpa 849(4)
A.Sato
M. Maeda
M. Yuyama
Y. Kamioka
Thermal Insulation of the Wendelstein 7-X Superconducting Magnet System 853(4)
F. Schauer
M. Nagel
Y. Bozhko
M. Pietsch
S.Y. Shim
F. Kufner
F.Leher
A. Binni
H. Posselt
Modeling Free Convection Flow of Liquid Hydrogen Within a Cylindrical Heat Exchanger Cooled to 14 K 857(4)
S.Q. Yang
M.A. Green
W. Lau
Experiment on Natural Convection of Subcooled Liquid Nitrogen 861(4)
Y.S. Choi
H-M. Chang
S.W. Van Sciver
CRYOGENS
Numerical Simulation of Flow Boiling of Cryogenic Liquids in Tubes 865(4)
X.D. Li
R.S. Wang
A.Z. Gu
A Density Equation for Saturated Helium-3 869(4)
X.Y. Li
Y.H. Huang
G.B. Chen
V. Arp
The Characterization of Carbon Nanofibres Based on N2 Adsorption Isotherms at 77 K 873(4)
C. Zhang
X. Lu
A. Gu
Experimental Investigation into Storage of Confined Cryogenic Liquids without Evaporation Venting 877(4)
Z. Huang
R. Wang
Y. Shi
A. Gu
Thermal Stress Analysis of Cryogenic Adhesive Joints for Non-Magnetic Dewar 881(4)
H.M. Zhu
T.X. Jin
L. Xu
H. Sun
Y.M. Xiao
PROPERTIES OF MATERIALS AT CRYOGENIC TEMPERATURES
Development of Cryogenic Structural Materials (Plenary Invited Paper) 885(10)
L.F. Li
Y.T. Zhang
Y.Y. Li
Thermal Conductivity of Materials and Measuring System at Cryogenic Temperature 895(4)
B. Li
B.M. Wu
D.S. Yang
W.H. Zheng
L.Z. Cao
Cryogenic Properties of Polymer Composite Materials - A Review 899(4)
S.Y. Fu
Y. Li
Y.H. Zhang
Q.Y. Pan
C.J. Huang
CRYOFLUIDS - A Software for Physical Property Data of Cryogenic Fluids 903(8)
P. Lalkoshti
R. Banerjee
A. Tarafder
S.K Sarangi
Discussion on Gibbons' Equation of State for Helium-3 911(4)
Y.H. Huang
G.B. Chen
X.Y. Li
An Internet-Based Working Fluid Properties Database 915(4)
J. Huang
Y.L. He
Y.W. Zhang
A New Process for the Preparation of Polyimide/Silica Hybrid Films 919(4)
Y. Li
S.Y. Fu
Q.Y. Pan
Y.H. Zhang
D.J. Lin
CRYOGENIC INSTRUMENTATION AND PROCESS CONTROL
Design of a Fibre Reinforced Plastic Anticryostat for Magnetorelaxometric Measurements 923(4)
T. Koettig
P. Weber
S. Prass
P. Seidel
Measurement of Heat Load on the Current Lead Using Boil-Off Calorimetry 927(4)
H.S. Yang
D.L. Kim
D.H. Kim
W.M. Jung
S. Cho
Alignment of the ISAC-II Medium Beta Cryomodule with a Wire Monitoring System 931(4)
W.R. Rawnsley
Y. Bylinski
K. Fong
R.E. Laxdal
G. Dutto
D. Giove
Digital Temperature Sensors in the Range of 77-300 K 935(4)
W. Nawrocki
A. Jurkowski
J. Pajakowski
Measurement of Characteristic Feature of Cavitation Flows of He I and He II 939(4)
K. Harada
R. Tsukahara
M. Murakami
Application of PIV Technique to Cavitating Flows of Liquid Helium 943(4)
R. Tsukahara
M. Murakami
K. Harada
Measurement of the Cryogenic Tensile Properties of Polymer Composites 947(4)
Q.Y. Pan
S.Y. Fu
Y.H. Zhang
Y. Li
High Precise Thermopower Measurement System and its Applying to Organic Conductors (TMTSF)2CIO4 in a Direction 951(4)
Y.S. Chai
H.S. Yang
J. Liu
L. Zhu
L.Z. Cao
Multichannel Temperature Monitor Compatible with PC 955(4)
Yu.P. Filippov
S.V. Alpatov
B.N. Sveshnikov
Interchangeability of Diode Temperature Sensors for Various Non-Standard Excitation Currents 959(4)
S. Courts
C. Yeager
The Laser Megajoule CryoTarget Thermal Regulation 963(4)
V. Lamaison
D. Brisset
B. Cathala
G. Paquignon
P. Bonnay
D. Chatain
D. Communal
J-P. Perin
Discussion of the Protection of Pressure Vessels by using Safety Valves-Rupture Disc-Combinations 967(4)
M. Suber
New Temperature and Magnetic Field Sensors for Cryogenic Applications Developed Under a European Project 971(4)
V.F. Mitin
P.C. McDonald
F. Pavese
N.S. Boltovets
V.V. Kholevchuk
I.Yu. Nemish
V.V. Basanets
V.K. Dugaev
P.V. Sorokin
E.F. Venger
E.V. Mitin
CRYOGENICS IN MEDICINE AND BIOLOGY
Characterization Studies of Sputter Deposited Cermet Cryogenic Heaters 975(4)
C. Yeager
S. Courts
L. Chapin
Study of Skin Burns due to Contact with Cold Mediums at Extremely Low Temperature 979(4)
Z-S. Deng
J. Liu
A New Method for Uniformly Cooling Engineered Tissues 983(4)
L-N. Yu
Z-S. Deng
J. Liu
Y-X. Zhou
Comparative Analysis of the Cryogens used in Cryomedical Applications 987(4)
M. Chorowski
A. Piotrowska
LHC
Measured Performance of Four New 18 kW@4.5 K Helium Refrigerators for the LHC Cryogenic System 991(4)
H. Gruehagen
U. Wagner
Overview of the Air Liquide Cryogenic Systems Designed for CERN LHC 995(4)
P. Dauguet
P. Briend
F. Delcayre
B. Hilbert
C. Mantileri
G. Marot
E. Monneret
E. Walter
1.8 K Refrigeration Units for the LHC: Performance Assessment of Pre-Series Units 999(4)
S. Claudet
G. Ferlin
F. Millet
L. Tavian
The Applicability of Ultrasonic Oxygen Deficiency Hazard Detectors in the LHC Accelerator Tunnel 1003(4)
K. Brodzinski
M. Chorowski
W. Gizicki
W. Ostropolski
G. Riddone
Numerical Study of the Final Cooldown from 4.5 K to 1.9 K of the Large Hadron Collider 1007(4)
G. Riddone
L. Liu
L. Tavian
Flow and Thermo-Mechanical Analysis of the LHC Sector Helium Relief System 1011(4)
M. Chorowski
J. Fydrych
G. Riddone
Cryogenic Infrastructure for Testing of LHC Series Superconducting Magnets 1015(4)
J. Axensalva
V. Benda
L. Herblin
JP. Lamboy
A. Tovar-Gonzalez
B. Vullierme
Final Testing of the ATLAS Central Solenoid before Installation 1019(4)
Y. Doi
T. Haruyama
M. Kawai
T. Kondo
Y. Kondo
Y. Makida
A. Yamamoto
F. Haug
J. Metselaar
G. Passardi
O. Pavlov
M. Pezzetti
O. Pirotte
R. Ruber
E. Sbrissa
H. Ten Kate
H. Tyrvainen
Control System and Operation of the Cryogenic Test Facilities for LHC Series Superconducting Magnets 1023(4)
J. Axensalva
L. Herblin
JP. Lamboy
A. Tovar-Gonzalez
B. Vullierme
Studies on Cooling of the TOTEM Particle Detector at the LHC 1027(4)
F. Haug
Cryogenics Safety Review of the ATLAS Experiment at CERN 1031(4)
F. Haug
Series Production of 13 kA Current Leads with Dry and Compact Warm Terminals 1035(4)
T.P. Andersen
V. Benda
B. Vullierme
Measurement of the Thermal Properties of Prototype Lambda Plates for the LHC 1039(4)
R. Marie
L. Metral
A. Perin
J.-M. Rieubland
The Cold-Compressor Systems for the LHC Cryoplants at CERN 1043(4)
A.Kuendig
H. Schoenfeld
Th. Voigt
K. Kurtcuoglu
S. Yoshinaga
N. Saji
T. Shimba
T. Honda
Two 100 m Invar? Transfer Lines at CERN: Design Principles and Operating Experience for Helium Refrigeration 1047(4)
S. Claudet
G. Ferlin
F. Millet
E. Roussel
JP. Sengelin
Experience with the String2 Cryogenic Instrumentation and Control System 1051(4)
P. Gomes
Ch. Balle
E. Blanco
J. Casas
S. Pelletier
M.A. Rodriguez
L.Serio
A. Suraci
N. Vauthier
The Management of Cryogens at CERN 1055(4)
D. Delikaris
K. Barth
G. Passardi
L. Serio. L. Tavian
Conceptual Design of the Cryogenic Electrical Feedboxes and the Superconducting Links of LHC 1059(4)
T. Goiffon
J. Lyngaa
L. Metral
A. Perin
P. Trilhe
R. van Weelderen
Author Index 1063

간단리뷰 (0)

0/1000자
컨텐츠평가
5점 만점에
0점 1점 2점 3점 4점 5점
이미지첨부
(파일용량은 1MB 이하이며, 파일형식은 jpg, jpeg 파일만 업로드 가능합니다.)

    교환/반품/품절안내

    ※ 상품 설명에 반품/교환 관련한 안내가 있는 경우 그 내용을 우선으로 합니다. (업체 사정에 따라 달라질 수 있습니다.)

    교환/반품/품절안내
    반품/교환방법 마이룸 > 주문관리 > 주문/배송내역 > 주문조회 > 반품/교환신청 ,
    [1:1상담>반품/교환/환불] 또는 고객센터 (1544-1900)

    ※ 오픈마켓, 해외배송주문, 기프트 주문시 [1:1상담>반품/교환/환불]
        또는 고객센터 (1544-1900)
    반품/교환가능 기간 변심반품의 경우 수령 후 7일 이내,
    상품의 결함 및 계약내용과 다를 경우 문제점 발견 후 30일 이내
    반품/교환비용 변심 혹은 구매착오로 인한 반품/교환은 반송료 고객 부담
    반품/교환 불가 사유
    • 소비자의 책임 있는 사유로 상품 등이 손실 또는 훼손된 경우
      (단지 확인을 위한 포장 훼손은 제외)
    • 소비자의 사용, 포장 개봉에 의해 상품 등의 가치가 현저히 감소한 경우
      예) 화장품, 식품, 가전제품(악세서리 포함) 등
    • 복제가 가능한 상품 등의 포장을 훼손한 경우
      예) 음반/DVD/비디오, 소프트웨어, 만화책, 잡지, 영상 화보집
    • 소비자의 요청에 따라 개별적으로 주문 제작되는 상품의 경우 ((1)해외주문도서)
    • 디지털 컨텐츠인 eBook, 오디오북 등을 1회 이상 다운로드를 받았을 경우
    • 시간의 경과에 의해 재판매가 곤란한 정도로 가치가 현저히 감소한 경우
    • 전자상거래 등에서의 소비자보호에 관한 법률이 정하는 소비자 청약철회 제한 내용에
      해당되는 경우
    (1) 해외주문도서 : 이용자의 요청에 의한 개인주문상품으로 단순변심 및 착오로 인한 취소/교환/반품 시 ‘해외주문 반품/취소 수수료’ 고객 부담 (해외주문 반품/취소 수수료 : ①서양도서-판매정가의 12%, ②일본도서-판매정가의 7%를 적용)
    상품 품절 공급사(출판사) 재고 사정에 의해 품절/지연될 수 있으며, 품절 시 관련 사항에 대해서는
    이메일과 문자로 안내드리겠습니다.
    소비자 피해보상
    환불지연에 따른 배상
    • 상품의 불량에 의한 교환, A/S, 환불, 품질보증 및 피해보상 등에 관한 사항은
      소비자분쟁해결 기준 (공정거래위원회 고시)에 준하여 처리됨
    • 대금 환불 및 환불지연에 따른 배상금 지급 조건, 절차 등은 전자상거래 등에서의
      소비자 보호에 관한 법률에 따라 처리함
    바로가기
    • 우측 확장형 배너 2
    • 우측 확장형 배너 2
    최근 본 상품